用废料打造自己的金属加工车间

Hacker News 上怎么说

• chromaton · 2017 年

  戴维·J·金格里的《用废料打造你自己的金工车间》系列。

  The Build Your Own Metal Working Shop from Scrap series by David J. Gingery.

• zipwitch · 2020 年

  对这方面感兴趣的朋友不妨看看已故的戴维·金格里写的这套七本《用废料打造你自己的金工车间》系列。虽然初衷是写给业余爱好者的指南，但这套书完全可以作为蓝图，教你如何利用废旧金属、木头和泥土，一步步做出一台功能完整的机器……

  Anyone who is interested in this sort of thing may wish to take a look at the seven-book Build Your Own Metal Working Shop From Scrap series by the late David Gingery. While intended as a guide for the hobbyist, the series could easily serve as a blueprint for how to go from scraps of metal, wood and earth to a fully functioning machine…

• webmaven · 2022 年

  ……地球的另一端。如果现有的基础设施和供应链遭到严重破坏，重启这一切所需的知识储备到底还存不存在？我一直很佩服戴维·J·金格里的《用废料打造你自己的金工车间》，甚至琢磨过集成电路领域有没有可能搞出类似的东西来。

  …side of the planet. Does the knowledge even exist to bootstrap things back up again should the present infrastructure and supply chains be sufficiently disrupted? I've long admired David J. Gingery's 'Build Your Own Metal Working Shop from Scrap' and wondered whether anything like it is even possible for integrated circuits.

• Animats · 2022 年

  这在 1950 年代的美国民防中是受到严肃对待的。既然欧洲刚刚经历过那样的过程，当时是有大量现成知识可用的。有一套经典的系列丛书《用废料打造你自己的金工车间》就是讲这个的。儿童版则是：《男孩与电池》（1942年）。[1] 还有一本《男孩与电动机》，讲如何用废金属罐、几根电线、一把锤子和铁皮剪做出一套属于自己的电动火车玩具，以及……

  This was taken seriously in 1950s US Civil Defense. Since Europe had already been through that process recently, there was a lot of knowledge available. There's a classic set of books, "Build Your Own Metal Working Shop From Scrap", on this. The kid's version: "A Boy and a Battery" (1942).[1] There's also "A Boy and a Motor", on how to build your own electric train set from old metal cans, some wire, a hammer and tinsnips, and…

• Animats · 2014 年

  ……75%。这还是在十年之后。- 员工留存问题。（任何志愿性质的项目面临的核心痛点。）- 创始人不愿放权。这种事以前有人做过，而且做得更好。有一套 1982 年的经典丛书《用废料打造你自己的金工车间》（http://www.amazon.com/Build-Your-Metalworking-Shop-Scrap/dp/...）。你从木炭、沙子、木头和废金属起步，建个小高炉，浇铸零件。利用这个高炉，你再制作零件去组装……

  …75%. This is after ten years. - Employee retention problems. (A major problem with any volunteer effort.) - Founder not into delegation. This has been done before, better. There's a classic series, "Build Your Own Metal Working Shop from Scrap" (http://www.amazon.com/Build-Your-Metalworking-Shop-Scrap/dp/...) from 1982. You start with charcoal, sand, wood, and metal scrap, set up a forge, and cast parts. With the forge, you make parts for…

• grogenaut · 2019 年

  ……（框架）而不是大规模量产解决方案。去看看家庭机加车间系列吧，了解一下你怎么靠最原始的废金属、木头和沙子一步步搭建起整套技术栈。《金属车床》（《用废料打造你自己的金工车间》系列第二册）https://www.amazon.com/dp/B007USU8HU/ref=cm_sw_r_cp_apa_i_Gh... 车床基本算得上是万机之母，而车床的本质其实就是螺杆

  …(frameworks) instead of mass production of the solution. Check out the home machine shop series to see how you'd build up a tech stack from basically scrap metal and wood and Sand. The Metal Lathe (Build Your Own Metal Working Shop From Scrap Series Book 2) https://www.amazon.com/dp/B007USU8HU/ref=cm_sw_r_cp_apa_i_Gh... The lathe is pretty much the ur-machine, and a lathe is really just screws

正在加载完整评论……